Farming Autonomy Operating System
Row Following & Motion Control
Precisely on its line, at the speed the job needs
The FAOS keeps your machine precisely on its line along every row and steers it smoothly at the speed the job needs.
How it works
-
01
Following Hedges & Trees
The field’s waypoint graph knows only how the rows connect: their ends as nodes, each row a straight edge between them. Between hedges and tree rows, your machine takes that edge as its route, senses the rows on either side as it drives and reacts, following them as they actually run, curves included. It holds the job’s working speed and eases off only where a bend gets tight.
The field's waypoint graph drops onto the ground and hedge rows grow along it. CARO then drives along a curved alley between them, its lidar picking out the hedges on either side, following the rows' real curve rather than the straight edge between their ends, and slows down for the tightest bend. The view then rises over the whole field, showing its track beside that straight edge. -
02
Following Vegetable Beds
Here, too, the waypoint graph gives each pass as a straight edge from one end to the other. The FAOS senses the beds beneath the machine as it drives and follows their real curve, keeping its wheels in the furrows and off the beds all the way.
The field's waypoint graph drops onto the ground and curved vegetable beds grow along it. Lero.03 then drives along them, straddling three beds at a time with its wheels in the furrows and its row cameras looking down at the beds, and slows down for the tighter bend. The view then rises over the whole field, showing its track beside the straight edge between the beds' ends. -
03
Precise Tool Control
Each unit of an implement can be a section of its own. With butterfly mowers, each unit drops and switches on right where it reaches the headland line and lifts right at the far one, so every strip starts and ends on the line. On the last row along the field boundary, for example, the outer unit can stay up.
A tractor with a front mower and two rear mowers mows a row, turns in the headland and mows the next row back. Each mower drops exactly at the headland line and lifts exactly at the far one, and the outer rear mower stays folded up on the last row along the field boundary. -
04
Versatile Tool Control
One row following serves every tool, on CARO or on a tractor. In a wide alley, an airblast sprayer drives down the middle and reaches both rows, while a tower sprayer that reaches only one keeps to its side. Mowing, trimming the grass edge and pruning work one side or both, and an over-row trimmer works from above the row. Whatever the implement, the FAOS places the machine where its tool does the job, between rows and in the open field alike.
A row of scenes, one job each, in fruit walls and in a tree nursery, many of them with rows that curve. A tractor with an airblast sprayer drives down the middle of a wide alley, spraying both rows, and CARO with a tower sprayer keeps to one side, spraying one. CARO then mows between nursery rows, trims the grass edge on one side and, in the nursery, on both, and prunes one side and both, and a tractor trims a row from above. The view pulls out over a grid of many more jobs, among them a combine harvesting, a tractor mowing a meadow and a boom sprayer over row crops.